Amazon Books
WallPapers
Risorse
Argomenti Popolari
Abend Code CICS da ABNC a ABX9
ABNC
Explanation: An attempt to access a temporary storage queue failed.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: Ensure that temporary storage is correctly generated.
Module: DFHTPS
ABNE
Explanation: An error response was received from an invocation of a BMS
TYPE=ROUTE or request.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: Check that BMS was correctly generated.
Module: DFHTPS
ABNF
Explanation: The transaction was not in send mode when it sent data to
the remote system.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: You need further assistance from IBM to resolve this
problem. See Part 4 of the CICS Problem Determination Guide for guidance
on how to proceed.
Module: DFHTPS
ABNG
Explanation: An attach request was received from the remote system
without any data indicating the reason for the request.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: You need further assistance from IBM to resolve this
problem. See Part 4 of the CICS Problem Determination Guide for guidance
on how to proceed.
Module: DFHTPS
ABNH
Explanation: An attempt to ship data to the remote system failed.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: You need further assistance from IBM to resolve this
problem. See Part 4 of the CICS Problem Determination Guide for guidance
on how to proceed.
Module: DFHTPS
ABNI
Explanation: CICS could not find a profile for an LU6.2 transaction
routing request.
System Action: CICS terminates the task abnormally.
User Response: Either you have specified an incorrect name in the
PROFILE parameter of an EXEC CICS ALLOCATE command, or you have not
Installed the profile.
Correct the error before resubmitting the transaction.
Module: DFHTPS
ABNJ
Explanation: The task was purged before a GETMAIN request to the
storage manager (SM) domain was able to complete successfully. The task
that first detected the purged condition provides an exception trace.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: Investigate the reason why the task was purged. It was
purged either by the master terminal operator or as a result of a
deadlock timeout.
Module: DFHTPS
ABNK
Explanation: An error (INVALID, DISASTER or unexpected EXCEPTION
response) has occurred on a call to the storage manager (SM) domain.
The domain that detected the original error provides an exception trace,
a console message and, possibly, a system dump (depending on the options
specified in the dump table).
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: See the related message produced by the domain that
detected the original error.
Module: DFHTPS
ABRC
Explanation: The bridge exit is not defined and could not be autoinstalled.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: Either define the program using RDO or change the
program autoinstall exit to allow it to be autoinstalled.
Modules: DFHBRMS, DFHBRTC
ABRD
Explanation: The bridge exit is disabled.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: Identify why the bridge exit is disabled. Enable the
bridge exit and retry the action.
Modules: DFHBRMS, DFHBRTC
ABRE
Explanation: The bridge exit could not be loaded.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: Investigate why it cannot be loaded. It may not have
been defined in the DFHRPL library.
Modules: DFHBRMS, DFHBRTC
ABRF
Explanation: The bridge exit is defined as remote.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: Define the bridge exit as a local program.
Modules: DFHBRMS, DFHBRTC
ABRG
Explanation: An invalid bridge facility token was specified
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: This error was probably caused by the incorrect data
being sent to the bridge exit from the client application.
Check the data set by tracing the data sent from the client application.
Ensure that the bridge facility token in the data transmitted by the
application is correct.
Module: DFHBRXM
ABRH
Explanation: The bridge facility token specified is not known to CICS.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: The most likely error is that the client application
specified too small a keep time for the bridge facility. Before the
client reused the bridge facility token, CICS had already discarded it.
Check the bridge facility keep time in the outbound messages.
CICS will use the keep time value specified in the last message used by a transaction. Alternatively use the trace or CEDX to look at the keep time in the BRXA passed back on the terminate call to the bridge exit.
Another possible error is that the client application passed a request
to a CICS system other than that on which the original request was sent.
Bridge facilities are only valid on a single CICS system.
Module: DFHBRXM
ABRI
Explanation: There are no free bridge facility tokens available. This
is probably due to excessive keep time values being specified on the
bridge exit termination call.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: Review the keep time values used by the client
applications. If some client applications are returning excessive
values, modify the bridge exit to specify a limit to the values.
Module: DFHBRXM
ABRJ
Explanation: An invalid FACILITYLIKE value was specified.
The FACILITYLIKE value can be specified on the bridge exit
initialization call. If the default value (blanks) is returned, the
value in the user transaction profile definition is used.
If no FACILITYLIKE value is specified in the profile definition, a value of CBRF is used.
The name must be that of an installed VTAM 3270 terminal.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: Define the terminal specified by FACILITYLIKE, change
the value on the profile definition, change the value supplied by the
client application, or install a terminal definition for CBRF
Module: DFHBRXM
ABRK
Explanation: The USERID check failed following the call to the bridge exit.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction will not be started.
User Response: Enter the correct password. If the password is correct
or was not supplied, review the RACF definitions.
Module: DFHBRXM
ABRN
Explanation: The bridge exit returned a value in BRXA_RESP that is not
valid for the command for which it was invoked.
System Action: The transaction is backed out.
User Response: Change the bridge exit to only return valid response
settings.
Modules: DFHBRIC, DFHBRMS, DFHBRSP, DFHBRTC
ABRQ
Explanation: The bridge exit issued an abend.
System Action: The transaction is backed out.
User Response: Identify why the bridge exit abended.
Modules: DFHBRMS, DFHBRTC
ABRR
Explanation: The user transaction's profile could not be found.
System Action: The task is abnormally terminated with a CICS
transaction dump. The user transaction is not started.
User Response: Check that the profile name in the user transaction
definition is correct, and that this profile has been defined.
Module: DFHBRXM
ABRY
Explanation: CICS returned an unexpected error running the bridge exit.
This is a CICS internal error.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: You need further assistance from IBM to resolve this
problem. See Part 4 of the CICS Problem Determination Guide for guidance
on how to proceed.
Modules: DFHBRMS, DFHBRTC
ABRZ
Explanation: The bridge exit returned invalid data in the BRXA.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: If a user supplied bridge exit was used, review the
format of the data returned by the exit.
If a CICS supplied exit was used, this is a CICS error. You need further
assistance from IBM to resolve this problem. See Part 4 of the CICS Problem
Determination Guide for guidance on how to proceed.
Modules: DFHBRIC, DFHBRMS, DFHBRSP, DFHBRTC, DFHXMBR
ABR3
Explanation: An unsupported BMS request was received by the bridge exit.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: The bridge only supports minimum function BMS and SEND
TEXT. This transaction cannot be used in a bridge environment.
Module: DFHEMS
ABR4
Explanation: The link DFHL3270 command did not specify a commarea.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: The link DFHL3270 command must specify a commarea to
contain the BRIH and any message vectors.
Module: DFHBRMR
ABR5
Explanation: The commarea specified in the link DFHL3270 command is
shorter than the BRIH.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: The link DFHL3270 command must specify a commarea to
contain the BRIH and any message vectors.
Module: DFHBRMR
ABR6
Explanation: The commarea specified in the link DFHL3270 command does
not contain a valid BRIH.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: The link DFHL3270 command must specify a commarea which
must contain a valid BRIH.
Module: DFHBRMR
ABSA
Explanation: A message passed to DFHBSMSG is too long. This is a CICS
internal error.
System Action: CICS terminates the task abnormally with a dump.
User Response: You need further assistance from IBM to resolve this
problem. See Part 4 of the CICS Problem Determination Guide for guidance
on how to proceed.
Module: DFHTBS
ABXA
Explanation: A next BRMQ vector in the input message passed to the
formatter is the wrong type of a RECEIVE vector. RECEIVE and RECEIVE MAP
have separate vectors.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: This may just indicate that the transaction has gone
down an error path which should result in a transaction backout. If not,
the input message should have a BRMQ vector for this command. Change the client
application, recompile and retry.
Module: DFH0CBRF
ABXB
Explanation: The BRIH requested that outbound BMS vector must include
the ADS descriptor. The map did not contain an ADS descriptor. This means
that the mapset was not assembled with CICS TS 1.2 or later.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: Either reassemble the mapset using the current level of
BMS macros, or set BRIH-ADSDESCRIPTOR to BRIHADSD-NO (the default value
is BRIHADSD-YES). Note that BRIHADSD-YES is required when codepage
conversion of the Link3270 message is required (e.g. using ECI). If you
need to reassemble the mapset and don't have the mapset source, the utility
DFHBMSUP can be used to recreate it.
Module: DFHBRMF
ABXC
Explanation: An error occurred when a SYNCPOINT request was issued by
the bridge exit.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: Check for other CICS messages and exception trace
entries to investigate the cause of the SYNCPOINT error.
Module: DFH0CBRE
ABXD
Explanation: An error occurred when a SYNCPOINT ROLLBACK request was
issued by the bridge exit.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: Check for other CICS messages and exception trace
entries to investigate the cause of the SYNCPOINT ROLLBACK error.
Module: DFH0CBRE
ABXE
Explanation: The bridge exit was expecting data to be passed on the
BRDATA parameter of the START command. No data was found.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: Correct the transaction which issued the START.
Recompile, reload and retry.
Module: DFH0CBAE,DFH0CBRE
ABXF
Explanation: An error was detected by the bridge exit when it tried to
input the next message.
System Action: An exception trace is made of any error information. The
task is abnormally terminated with a CICS transaction dump.
User Response: Check for other CICS messages and exception trace
entries to investigate the cause of the input error.
Module: DFH0CBAE,DFH0CBRE,DFH0CBAI
ABXG
Explanation: An error was detected by the bridge exit when it tried to
output the next message.
System Action: An exception trace is made of any error information. The
task is abnormally terminated with a CICS transaction dump.
User Response: Check for other CICS messages and exception trace
entries to investigate the cause of the output error.
Module: DFH0CBAE,DFH0CBRE
ABXH
Explanation: The user transaction issued a request which requires more
data (such as a RECEIVE request). No data was available in the message, and
mqcih-conversationaltask was set to mqcct-no which specifies that the
transaction is non conversational.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: This may be correct behaviour as defined by the client
application. If it is not, the client application should either supply
additional data, or be redesigned to allow the transaction to be conversational.
Module: DFH0CBRF
ABXI
Explanation: A message received by the bridge exit, exceeded the
maximum message size.
System Action: An exception trace is made of the first 4K of data in
error. The task is abnormally terminated with a CICS transaction dump.
User Response: Check that the client application is passing the correct
data. If it is, it will be necessary to change the size of the buffer.
This is in field block-length in the sample exit. Recompile and reload the exit and retry.
Module: DFH0CBAE,DFH0CBRE
ABXJ
Explanation: The bridge exit detected an error in the MQCIH header
passed by the client application.
System Action: An exception trace is written containing the MQCIH
header. The task is abnormally terminated with a CICS transaction dump.
User Response: The client application has either not set the MQCIH
header, or is using a version of the header which is incompatible with
the bridge exit.
Correct the client application. Recompile, reload and retry.
Module: DFH0CBAE,DFH0CBRE
ABXK
Explanation: The bridge exit detected an error in the data passed on
the BRDATA parameter of the START command.
System Action: An exception trace is made of the data in error. The
task is abnormally terminated with a CICS transaction dump.
User Response: Correct the transaction which issued the START.
Recompile, reload and retry.
Module: DFH0CBAE,DFH0CBRE
ABXM
Explanation: The bridge exit or formatter was called with a function or
command which it doesn't support. This either indicates a storage
overwrite, or that the bridge exit is not designed for this command.
System Action: An exception trace is made of the data in error. The
task is abnormally terminated with a CICS transaction dump.
User Response: Check the BRXA data in the trace to see if there has
been a storage overwrite, or whether the exit supports this command.
Module: DFH0CBAE,DFH0CBRE,DFH0CBRF
ABXN
Explanation: The formatter detected that the input message was truncated.
System Action: An exception trace is made of the first 4K of the
message. The task is abnormally terminated with a CICS transaction dump.
User Response: Check that the transport mechanism allows for messages
of this length. If this is correct, it indicates that the client
application is issuing an incorrect message. Trace the outbound message on the client application. Recompile, reload and retry.
Module: DFH0CBRF
ABXO
Explanation: The formatter detected an error in a BRMQ vector passed by
the client application.
System Action: The field MQCIH-ERROROFFSET is set to indicate the
position of the error in the message An exception trace is made of the
MQCIH and
BRMQ vector. The task is abnormally terminated with a CICS transaction dump.
User Response: Correct the client application. Recompile, reload and retry.
Module: DFH0CBRF
ABXP
Explanation: The formatter detected an error in a BRMQ vector header
passed by the client application.
System Action: The field MQCIH-ERROROFFSET is set to indicate the
position of the error in the message An exception trace is made of the
MQCIH and
BRMQ vector. The task is abnormally terminated with a CICS transaction dump.
User Response: Correct the client application. Recompile, reload and retry.
Module: DFH0CBRF
ABXQ
Explanation: The formatter could not find an ADSD vector as part of the
BRMQ-RM vector when MQCIH-ADSDESCRIPTOR specified MQCADSD-MSGFORMAT.
System Action: An exception trace is made of the request. The task is
abnormally terminated with a CICS transaction dump.
User Response: Correct the client application. Recompile, reload and retry.
Module: DFH0CBRF
ABXS
Explanation: An error was detected by the bridge exit when it tried to
open the queue for the input or output message.
System Action: An exception trace is made of any error information. The
task is abnormally terminated with a CICS transaction dump.
User Response: Check for other CICS messages and exception trace
entries to investigate the cause of the open error.
Module: DFH0CBRE
ABXU
Explanation: The conversion between client code page and server code
page is not supported by CICS/390; for example conversion has been
requested between Japanese code page 932 and Latin-1 code page 500.
System Action: The transaction is abnormally terminated with a
transaction dump.
User Response: Ensure that the Client codepage, both default and
overrides are in the same group as the Server codepage. for example
client code page 852 from Latin-2 group, is only supported to server
code page 870.
Module: DFHBRMF
ABXV
Explanation: The client code page which has been requested by the
client is not one which CICS can support.
System Action: The transaction is abnormally terminated with a
transaction dump.
User Response: Ensure that the Client codepage is valid.
Module: DFHBRMF
ABX1
Explanation: The bridge exit or formatter was called with an invalid
BRXA-HEADER. This indicates a storage overwrite.
System Action: An exception trace is made of the data in error. The
task is abnormally terminated with a CICS transaction dump.
As CICS also does a check of the BRXA on return from the call to the
exit, there will probably be a subsequent ABRZ abend.
User Response: Investigate the cause of the storage error, and retry.
Module: DFH0CBAE,DFH0CBRE,DFH0CBRF
ABX2
Explanation: The bridge exit or formatter was called with an invalid
BRXA-TRANSACTION-AREA. This indicates a storage overwrite.
System Action: An exception trace is made of the data in error. The
task is abnormally terminated with a CICS transaction dump.
As CICS also does a check of the BRXA on return from the call to the
exit, there will probably be a subsequent ABRZ abend.
User Response: Investigate the cause of the storage error, and retry.
Module: DFH0CBAE,DFH0CBRE,DFH0CBRF
ABX3
Explanation: The bridge exit or formatter was called with an invalid
BRXA-COMMAND-AREA. This indicates a storage overwrite.
System Action: An exception trace is made of the data in error. The
task is abnormally terminated with a CICS transaction dump.
As CICS also does a check of the BRXA on return from the call to the
exit, there will probably be a subsequent ABRZ abend.
User Response: Investigate the cause of the storage error, and retry.
Module: DFH0CBAE,DFH0CBRE,DFH0CBRF
ABX5
Explanation: The bridge exit or formatter was called without a
user-area. This probably indicates an error in the bridge exit.
System Action: An exception trace is made of the data in error. The
task is abnormally terminated with a CICS transaction dump.
User Response: Investigate the cause of the storage error, and retry.
Module: DFH0CBAE,DFH0CBRE,DFH0CBRF
ABX6
Explanation: The bridge exit or formatter was called with an invalid
user-area. This indicates a storage overwrite or an error in the bridge
exit.
System Action: An exception trace is made of the data in error. The
task is abnormally terminated with a CICS transaction dump.
User Response: Investigate the cause of the storage error, and retry.
Module: DFH0CBAE,DFH0CBRE,DFH0CBRF
ABX7
Explanation: A TC command passed to the formatter, exceeded the maximum
message size.
System Action: An exception trace is made of the first 4K of data in
error. The task is abnormally terminated with a CICS transaction dump.
User Response: Check that the user transaction is passing the correct
data. If it is, it will be necessary to change the size of the buffer.
This is in field block-length in the sample exit. Recompile and reload the exit and retry.
Module: DFH0CBRF
ABX8
Explanation: A next BMS BRMQ vector in the input message passed to the
formatter does not contain the mapset requested to answer a RECEIVE MAP
request.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: This may just indicate that the transaction has gone
down an error path which should result in a transaction backout. If not,
the input message should have a BRMQ vector for this mapset.
Change the client application, recompile and retry.
Module: DFH0CBRF
ABX9
Explanation: A next BMS BRMQ vector in the input message passed to the
formatter does not contain the mapname requested to answer a RECEIVE
MAP request.
System Action: The task is abnormally terminated with a CICS
transaction dump.
User Response: This may just indicate that the transaction has gone
down an error path which should result in a transaction backout. If not,
the input message should have a BRMQ vector for this mapname. Change the client
application, recompile and retry.
Module: DFH0CBRF